Archive for June, 2006

Amsterdam en Rotterdam bieden podium aan homohater

Tuesday, June 13th, 2006

Binnenkort treed in Amsterdam en Rotterdam een Jamaicaanse artiest op (Buju Banton). Ongetwijfeld zal hij zijn lied ‘Boom boom bye bye’ ten gehore brengen, waarin wordt gezongen dat je homo’s door hun hoofd moet schieten. Op Jamaica is hij (ondanks dat hij door het corrupte regime onschuldig is verklaard) ‘s nachts het huis van een homoseksuele man binnengedrongen met een groep handlangers, om de bewoner dood te slaan. Ook in interviews steekt hij zijn haat jegens de homoseksuele medemens niet onder stoelen of banken.

Niet zo lang geleden werd hij geweerd van het Amsterdams UIT festival, juist om bovengenoemde reden. De Melkweg in Amsterdam meent echter dat met de vrijspraak door het corrupte regime (ook de politie mag graag potenrammen daar) de lucht geklaard is. Ik vindt dit enigszins naief, en de beslissing lijkt mij toch vooral door financiele overwegingen beinvloed.

Hoe dan ook, de man mag weer optreden en zal ongetwijfeld weer flink bijdragen aan het steeds homo-onvriendelijkere klimaat in dit land. En dat snap ik nou niet, aan de ene kant hoor je van de zwarte cultuur een hoop geklaag en gejammer over discriminatie. Maar homoseksualiteit wordt in diezelfde cultuur zo afgekeurd dat moord ineens goedgepraat kan worden.

Deze homohaat van de zwarte medemens raakt mij behoorlijk diep. Ik weet het, je mag niet generaliseren. Dat is echter makkelijker gezegd dan gedaan als je keer op keer met de homofobe cultuur van vele zwarten geconfronteerd wordt. Het kost mij echt enorm veel moeite om de val van het racisme te lopen (zeker na onlangs fysiek te zijn aangevallen door zo’n figuur). Bij elke raggea-song vraag ik mij tegenwoordig af ‘is dit nu ook zo’n homo hater’. Bij elke zwarte die ik tegenkom of zie lopen denk ik, ‘haat die mij ook om hoe ik ben’. Dat is wat mensen als Buju Banton veroorzaken.
Kortom, ik denk niet dat Amsterdam en Rotterdam de samenleving een dienst verlenen met het bieden van een podium aan deze tot moord oproepende neger. Ik laat voorlopig de melkweg in Amsterdam in iedergeval maar even voor wat het is, zo bijzonder is het daar nu ook weer niet en veel van de artiesten die daar komen en de moeite waard zijn spelen ook in zalen elders in het land (waar het vaak nog veel gezelliger is ook).

Flattr this

Arcade hobby project, pt. 2

Monday, June 5th, 2006

Here is a short update on our arcade hobby project. We thought we were pretty much done with it when we pulled out the television tube and hardware and mounted that in the cabinet. But things worked out differently. We spent days (and then some more days) trying to get the tv working but to no avail. No matter what we tried, we couldn’t get the sync signals timed right for it. Using a modulator and a tv card we only got black and white. So in the end we had to conclude that the tv was broken (or that we broke it by remounting it in the cabinat, we didn’t test before hand whether it worked……).

Anyway, we found a new tv in the tv repair and second hand tv shop downstairs in our office building, tested that before taking it out of its shell and mounting it in the cabinet. This time, everything worked out nicely. We tried to get a picture and hooray it worked! So we planned for a friday evening of tinkering with the arcade under the enjoyment of a couple of beers (ps: funny how much friends you have when you take a case of beer on your morning commute).
We then had the luminous idea to do a transplant of the motherboard too, we were using an old celeron 450Mhz board, but running outrun in xmame proved to be a bit too much for that so we decided to replace that with a 1Ghz celeron. Of course, that was not without problems. For example, the old board had ISA and we had an ISA sound- and joystick card. The new board only had PCI. So after mobilizing a girlfriend to bring us a new PCI sound card, and determining the proper order of PCI cards, we finally could play! The first game was bubble bobble, one of the old arcade classics in its C64 version.

So, now what is left is the finishing touch: mount the pc inside the cabinet, work on the paint and construction of the cabinet itself, write a frontend to choose games from xmame (the multi arcade machine emulator) or xmess (the emulator for sega, nintendo, commodore, msx and other systems), and get stereo sound (due to one amp getting very hot we decided to go for mono for the moment).

Flattr this